Bezoek onze nieuwe winkel in Haarlem! geopend di t/m za 10-17u.
Bekijk hier onze aanbiedingen
Klik hier voor alle nieuwe modelspoor producten
Hobby & Verzamelartikelen van het thema Rails H0
This is for retrofitting 2 C Track turnouts. The turnout lanterns can be used right, left, or three-way turnouts. They can be used with a manual hand lever and/or with the 74491 electric turnout mechanism. The lights for the lanterns are maintenance-free warm white LEDs.
€ 18,00
|
Nieuw
|
In winkelwagen |
To separate power circuits or signal blocks. 8 pieces for 4 insulation points.
€ 3,15
|
Nieuw
|
In winkelwagen |
The light mast can be plugged into the Märklin 24997 C-Track or Trix 62997 C-track . The mast signal lights up when the uncoupler track is activated. Metal mast. Height 85 mm / 3-38". This light mast is technically the same as the earlier 5113 mast.
€ 14,85
|
Nieuw
|
In winkelwagen |
The reed switch is for use at a suitable point with K Track or C Track. The reed switch triggers a pulse of current when a locomotive or car with a magnet mounted on the underside passes over it. The connections to the reed switch are potential-free. The reed switch has a maximum current capacity of 2 amps. Length 38 mm / 1-1/2".
€ 14,50
|
Nieuw
|
In winkelwagen |
6 pieces. 10 x 5 x 1.5 mm / approx. 25/64" x 3/16" x 1/16". This magnet is for activating 7555 reed switches. It is for locomotives with little ground clearance.
€ 14,50
|
Nieuw
|
In winkelwagen |
3 pieces. 13 x 7 x 2.5 mm (approx. 1/2" x 9/32" x 3/32"). This magnet is for activating 7555 reed switches. It is for locomotives with greater ground clearance.
€ 14,50
|
Nieuw
|
In winkelwagen |
2 pieces. 10 x 10 x 3 mm / approx. 3/8" x 3/8" x 1/8". This magnet is for activating the 7555 reed switch. It is for freight and passenger cars.
€ 14,50
|
Nieuw
|
In winkelwagen |
For retrofitting 2 C Track turnouts. The turnout lanterns can be used right, left or three-way turnouts. They can be used with a manual hand lever and/or with the 74491 electric turnout mechanism. The lights for the lanterns are maintenance-free LEDs.
€ 18,00
|
Nieuw
|
In winkelwagen |
These spade connectors can be used for the contact fingers on C Track. They are for all Märklin wire from 0.19 sq. mm / 0.0003 sq. in. or 0.02 in. diameter to 0.75 sq. mm / 0.001 sq. in. or 0.04 in. diameter. 1 package contains 20 spade connectors.
€ 5,55
|
Nieuw
|
In winkelwagen |
Red and brown feeder wires with spade connectors at both ends, for C Track. Length 2 meters / 78-3/4".
€ 6,75
|
Nieuw
|
In winkelwagen |
This is an improved kit for upgrading C Track turnouts. It has a double solenoid mechanism with end shut-off contacts.
€ 23,50
|
Nieuw
|
In winkelwagen |
This feeder wire set has spade connectors for C Track. The set has two-conductors with a red and a brown wire.
€ 5,20
|
Nieuw
|
In winkelwagen |
1.6 x 13 mm / 1/16" x 1/2" with cross point head. Contents 200 pieces.
€ 9,45
|
Nieuw
|
In winkelwagen |